wonderhowto_01.png

bObsweep Robot Vacuum: How-To's

Latest Articles

Article cover image
Jan 10, 2024

A quick and easy guide to setting up the mop feature on bObsweep Pethair or bObsweep Standard.When the mop pad is properly attached, Bob will simultaneously sweep, vacuum, and mop all reachable spaces ...

Article cover image
May 23, 2015

bObsweep Standard and Pethair both come with their lithium-ion battery installed for you. But if you ever need to remove and replace the battery on either model, follow the walk through below.These in ...

Article cover image
May 20, 2015

With just a Phillips head screwdriver and this walk-through, you can open and close any bObi robot vacuum. So long as you have a replacement wheel, follow these steps to install it yourself. Unscrew t ...

Article cover image
May 14, 2015

bObi has four floor detection sensors on her underside that warn her not to drive over ledges and stop her from falling down stairs.For this replacement, you will need a Phillips head screwdriver and ...

Article cover image
May 13, 2015

One of the quickest repairs for bObi is replacing the main brush motor. To do this, you'll need a Phillips head screwdriver and a replacement main brush motor.During all of bObi's repairs, always keep ...

Article cover image
May 13, 2015

Every bObi robotic vacuum works best with a clean dustbin and brushes. Luckily all of bObi's parts are easy to remove and wash, so you can do so whenever you notice large amounts of debris collected.T ...

Article cover image
May 13, 2015

If you notice bObi acting differently, try this home check up test. It will let you know whether or not bObi's sensors, motors, and parts are all working properly. After performing this diagnostic, yo ...

Article cover image
May 13, 2015

When you first receive bObi, the battery is not plugged in. Luckily all you need is a Phillips head screwdriver to install it before bObi starts working for you.Your battery may be blue or green colou ...

Article cover image
May 13, 2015

These instructions are applicable to both bObsweep models. Follow the video or text descriptions to replace the disinfecting UV lamp on your automatic vacuum.This walk through includes: opening bObswe ...

Article cover image
May 12, 2015

A step-by-step guide to replacing the side brush motor on bObsweep Standard or Pethair. Follow the video or multimedia directions in order to open up bObsweep, remove the main board, replace the side ...